Mirror Wall Medicine Cabinet
Dave's Workshop Home - Current Projects - Completed Projects - Metalworking
Teamcasa Main Home Page
First draft of plan
Miters adjusted on the disk sander.
Spline jig - made from a tenoning jig.
Double splines to reinforce the miters.
Splines glued and clamped with poly glue.
Dado the cabinet sides.
Ready to assemble the cabinets.
Clamp up the cabinet
Since this was a cope and stick joint and I was going to use a mirror for the panel, I decided that adding a tenon would provide the added strength I needed. Made with my shop made mortising jig.
Pre-finishing some parts
Rebate relief for mirror and panel.
French Cleat for mounting the large center mirror.
Custom made crown just sitting in place, waiting for the lights.
Done! Mirrors installed and hung in bathroom!